- Aircrafts(77)
- Masks(50)
- Decals(21)
- Accessories(19)
- Books(1)
- New products
- Products on sale
Decals light plywood 2
Description
Digital printing on transparent water-slide paper. No white color
A4 size 297x210 mm, clear decal paper (no white color)
Dedicated to the 1:32 scale (possibly 1:48).
The surface of the model should be prepared for the application of the decal. The white background color will give the effect of the image. You can apply shading effects underneath and on the decal. You can change the white balance (under the decal on the model's surface) to cool down or warm up the color. For professional use.
Related products
Friedrichshafen FF.33L 1:32
First batch shipping time from 6 to 10 weeks. Limited number of models.
German version FF.33L plane - 4 painting schemes.
Polish version - 1 painting scheme (different vertical stabilizer and other windscreen)
Kit-set description:
After building, the plane has a span of 415 mm and a length of 280 mm. It gives the impression of a large model also due to its height (about 120 mm). Weight about 500 g. The model is made entirely of resin. Bearing struts (float and wings) reinforced with steel wire, wings reinforced with 1.2 mm brass wire. Solid floats in one piece (not divided).
Friedrichshafen FF.33L 1:32 Polish Service
First batch shipping time from 6 to 10 weeks. Limited number of models.
German version FF.33L plane - 4 painting schemes.
Polish version - 1 painting scheme (different vertical stabilizer and other windscreen)
Kit-set description:
After building, the plane has a span of 415 mm and a length of 280 mm. It gives the impression of a large model also due to its height (about 120 mm). Weight about 500 g. The model is made entirely of resin. Bearing struts (float and wings) reinforced with steel wire, wings reinforced with 1.2 mm brass wire. Solid floats in one piece (not divided).
Friedrichshafen FF.33L 1:32 Naval Hex CAMO
Friedrichshafen FF.33L 1:32 Naval Hex CAMO
Kit-set description:
After building, the plane has a span of 415 mm and a length of 280 mm. It gives the impression of a large model also due to its height (about 120 mm). Weight about 500 g. The model is made entirely of resin. Bearing struts (float and wings) reinforced with steel wire, wings reinforced with 1.2 mm brass wire. Solid floats in one piece (not divided).
Albatros C.III 1-32 scale
Albatros C.III 1:32 LukGraph resin kit
Premium set: 3 x A4 sheets woodgrain and canvas decals, and masks (1mm rib strips, main German crosses) all made by LukGraph (few decals added to the online store as separately product).
Description of the kitset
Albatros C.III 1-32 scale PREMIUM SET
Albatros C.III 1:32 LukGraph resin kit
Premium set: 3 x A4 sheets woodgrain and canvas decals, and masks (1mm rib strips, main German crosses) all made by LukGraph (few decals added to the online store as separately product).
Description of the kitset
Albatros C.III 1-32 scale Polish service
Albatros C.III 1:32 LukGraph resin kit
From today we accept preorders - shipping time to 60 days.
Premium set: 3 x A4 sheets woodgrain and canvas decals, and masks (1mm rib strips, main German crosses) all made by LukGraph (few decals added to the online store as separately product).
Description of the kitset
LLOYD C.V 1:32 scale
LLOYD C.V 1:32 LukGraph resin kit
LLOYD C.V 1:32
LLOYD C.V 1:32 PREMIUM SET 1:32 scale kit
LLOYD C.V 1:32 in Polish service
LLOYD C.V 1:32 scale PREMIUM SET
LLOYD C.V 1:32 LukGraph resin kit
LLOYD C.V 1:32
LLOYD C.V 1:32 PREMIUM SET 1:32 scale kit
LLOYD C.V 1:32 in Polish service
LLOYD C.V 1:32 scale in POLISH service
LLOYD C.V 1:32 LukGraph resin kit
LLOYD C.V 1:32
LLOYD C.V 1:32 PREMIUM SET 1:32 scale kit
LLOYD C.V 1:32 in Polish service
RAF BE2c 1:32 PREMIUM SET Full Printed kit
Royal Aircraft Factory BE2c 1:32
Full Printed kit
RAF BE2c 1:32 scale Full Printed kit
Royal Aircraft Factory BE2c 1:32
Full Printed kit
RAF BE2e/f 1:32 scale PREMIUM SET
Royal Aircraft Factory BE2e/f 1:32 LukGraph resin kit PREMIUM SET
Rumpler 6B.1 1:32
LukGraph Rumpler 6b.1 | 1:32
From today we accept pre-orders - shipping time to 60 days.
Rumpler 6B.1 1:48
LukGraph Rumpler 6b.1 1:48
From today we accept pre-orders - shipping time to 60 days.
Lohner Type L 1:48
Lohner type L |1:48| A-H Flyingboat
From today we accept pre-orders - shipping time to 60 days.
Lohner Type L 1:32
Lohner type L | 1:32 | A-H Flyingboat
From today we accept pre-orders - shipping time to 60 days.
Lohner Type L PREMIUM 1:32
Lohner type L | 1:32 | A-H Flyingboat
From today we accept pre-orders - shipping time to 60 days.
Potez 25 1:48
Potez 25 A2 French airliner designed in 1924, one of the most popular aircraft of this class in the interwar period, used in many countries around the world.
The set includes markings for the French (2) and Polish (2) aircraft. The model is highly detailed and will contain a large number of printed parts.
Potez 25 A2 1:32 Polish Service
Potez 25 A2 French airliner designed in 1924, one of the most popular aircraft of this class in the interwar period, used in many countries around the world.
The model is highly detailed and will contain a large number of printed parts.
Potez 25 A2 1:32 French Service
Potez 25 A2 French airliner designed in 1924, one of the most popular aircraft of this class in the interwar period, used in many countries around the world.
The model is highly detailed and will contain a large number of printed parts.
Albatros D.III Oeffag PL service 1:32 FULL PRINTED KIT
Albatros D.III Oeffag 153/253 in Polish Service
Full Printed kit
SWORL Decal (1xA4) with linen effect included
Albatros D.III Oeffag 1:32 FULL PRINTED KIT
Albatros D.III Oeffag 153/253 Austro-Hungarian
Full Printed kit - 8 Painting shemes!
Albatros D.III Oeffag PREMIUM SET 1:32 FULL PRINTED KIT
Albatros D.III Oeffag 153/253 Austro-Hungarian PREMIUM SET
Full Printed kit
Standard version + extras!
8 Painting shemes!
Hanriot HD.1 1:32 Full printed kit
Hanriot HD.1/HD.2
Full printed kit
No raster prints.
Hanriot HD.2 1:32 Full printed kit
Hanriot HD.1/HD.2
Full printed kit
No raster prints.
Hanriot HD.2 FLOAT 1:32 Full Printed kit
Hanriot HD.1/HD.2
Full printed kit
No raster prints.
Albatros D.III Oeffag 1:24
Albatros D.III Oeffag 153/253 Austro-Hungarian
6 Painting shemes!
Albatros D.III Oeffag PL 1:24
Albatros D.III Oeffag 153/253 In Polish Service
5 Painting shemes! Sworl decal 1:24 included!
Curtiss Jenny JN-4D 1:32PREMIUM FULL PRINTED KIT
Curtiss Jenny JN-4D 1:32 Full Printed kit
Curtiss Jenny JN-4 1:32 PREMIUM FULL PRINTED KIT
Curtiss Jenny JN-4 1:32 PREMIUM FULL PRINTED KIT
Curtiss Jenny JN-4D 1:48
Kit-set contains:
Resin Casting Parts
3D printed parts
- Spoked wheels included to the model, solid wheels.
- All struts, strong black ABS PRO resin printed with holes to easier connect parts with wire (mounting wires included to the model).
- photo-etched parts (over 100 pcs.)
- steel wire to connect wings (1.2mm) and copper wires to mounting struts (0.8, 0.5)
- Decals 7 paintings (JN-4D), 5 paintings (JN-4)
- Colored instructions
Curtiss Jenny JN-4 1:48
Kit-set contains:
Resin Casting Parts
3D printed parts
- Spoked wheels included to the model, solid wheels.
- All struts, strong black ABS PRO resin printed with holes to easier connect parts with wire (mounting wires included to the model).
- photo-etched parts (over 100 pcs.)
- steel wire to connect wings (1.2mm) and copper wires to mounting struts (0.8, 0.5)
- Decals 7 paintings (JN-4D), 5 paintings (JN-4)
- Colored instructions
Albatros W.4 1:32 FULL PRINTED KIT
Kit-set includes Hex camo decals as standard (2 pcs)
Full printed kit
Albatros W.4 1:32 PREMIUM FULL PRINTED KIT
Albatros W.4 1:32 Full printed kit PREMIUM SET
Premium set with extras!
- decals with linen and wood effect
- Turnbuckles Albatros type 140 pcs
PWS-26 early version 1:32
Opis zestawu:
- Kadłub drukowany
- Skrzydło górne - odlew żywiczny zbrojony podwójnym stalowym drutem 1,2 mm.
- Skrzydła dolne - odlew żywiczny zbrojony pojedynczym drutem stalowym 1,2 mm.
- Stateczniki i stery - odlewy żywiczne.
- Pozostałe części - druk 3D wysokiej jakości.
- Blaszki fototrawione
- Kalkomania (druk cyfrowy, aplikacja na wodzie - zalecane przetestowanie)
- Elementy pomocnicze (druty, szablon owiewki)
- Instrukcja
PWS-26 1:32
Opis zestawu:
- Kadłub drukowany
- Skrzydło górne - odlew żywiczny zbrojony podwójnym stalowym drutem 1,2 mm.
- Skrzydła dolne - odlew żywiczny zbrojony pojedynczym drutem stalowym 1,2 mm.
- Stateczniki i stery - odlewy żywiczne.
- Pozostałe części - druk 3D wysokiej jakości.
- Blaszki fototrawione
- Kalkomania (druk cyfrowy, aplikacja na wodzie - zalecane przetestowanie)
- Elementy pomocnicze (druty, szablon owiewki)
- Instrukcja
PWS-26 early version 1:48
Opis zestawu:
- Kadłub drukowany
- Skrzydło górne - odlew żywiczny zbrojony podwójnym stalowym drutem 1,0 mm.
- Skrzydła dolne
- Stateczniki i stery - odlewy żywiczne.
- Pozostałe części - druk 3D wysokiej jakości.
- Blaszki fototrawione
- Kalkomania (druk cyfrowy, aplikacja na wodzie - zalecane przetestowanie)
- Elementy pomocnicze (druty, szablon owiewki)
- Instrukcja
PWS-26 1:48
Opis zestawu:
- Kadłub drukowany
- Skrzydło górne - odlew żywiczny zbrojony podwójnym stalowym drutem 1,0 mm.
- Skrzydła dolne
- Stateczniki i stery - odlewy żywiczne.
- Pozostałe części - druk 3D wysokiej jakości.
- Blaszki fototrawione
- Kalkomania (druk cyfrowy, aplikacja na wodzie - zalecane przetestowanie)
- Elementy pomocnicze (druty, szablon owiewki)
- Instrukcja
PWS-26 early version 1:72
Opis zestawu:
- Kadłub drukowany
- Skrzydło górne
- Skrzydła dolne
- Stateczniki i stery - odlewy żywiczne.
- Pozostałe części - druk 3D wysokiej jakości.
- Blaszki fototrawione
- Kalkomania (druk cyfrowy, aplikacja na wodzie - zalecane przetestowanie)
- Elementy pomocnicze (druty, szablon owiewki)
- Instrukcja
PWS-26 1:72 Full Printed kit
Opis zestawu:
- Kadłub drukowany
- Skrzydło górne
- Skrzydła dolne
- Stateczniki i stery - odlewy żywiczne.
- Pozostałe części - druk 3D wysokiej jakości.
- Blaszki fototrawione
- Kalkomania (druk cyfrowy, aplikacja na wodzie - zalecane przetestowanie)
- Elementy pomocnicze (druty, szablon owiewki)
- Instrukcja
Phönix D.I 1:32 Full Printed kit
The Phönix D.I was the second design developed by the Phönix Flugzeug-Werke based on Hansa-Brandenburg D.I design which it has produced under licence. The D.I was a single-seat biplane fighter with improvements over the original Hansa-Brandenburg design which included more efficient wings, a more powerful engine and structural improvements. A prototype was first flown in 1917 and proved to be fast but difficult to handle but because of the urgent need for fighters the D.I entered production. To improve the problems a modified variant, the D.II was introduced with balanced elevators and balanced ailerons on the upper wings.
Phönix D.I 1:32 PREMIUM Full Printed kit
The Phönix D.I was the second design developed by the Phönix Flugzeug-Werke based on Hansa-Brandenburg D.I design which it has produced under licence. The D.I was a single-seat biplane fighter with improvements over the original Hansa-Brandenburg design which included more efficient wings, a more powerful engine and structural improvements. A prototype was first flown in 1917 and proved to be fast but difficult to handle but because of the urgent need for fighters the D.I entered production. To improve the problems a modified variant, the D.II was introduced with balanced elevators and balanced ailerons on the upper wings.
Phönix D.II 1:32 FULL PRINTED KIT
The Phönix D.I was the second design developed by the Phönix Flugzeug-Werke based on Hansa-Brandenburg D.I design which it has produced under licence. The D.I was a single-seat biplane fighter with improvements over the original Hansa-Brandenburg design which included more efficient wings, a more powerful engine and structural improvements. A prototype was first flown in 1917 and proved to be fast but difficult to handle but because of the urgent need for fighters the D.I entered production. To improve the problems a modified variant, the D.II was introduced with balanced elevators and balanced ailerons on the upper wings.
Phönix D.II 1:32 PREMIUM FULL PRINTED KIT
The Phönix D.I was the second design developed by the Phönix Flugzeug-Werke based on Hansa-Brandenburg D.I design which it has produced under licence. The D.I was a single-seat biplane fighter with improvements over the original Hansa-Brandenburg design which included more efficient wings, a more powerful engine and structural improvements. A prototype was first flown in 1917 and proved to be fast but difficult to handle but because of the urgent need for fighters the D.I entered production. To improve the problems a modified variant, the D.II was introduced with balanced elevators and balanced ailerons on the upper wings.
PWS-10 1:32 Full Printed kit
The set includes:
- Model printed entirely in 3D technology, high quality, non-raster (may require slight smoothing).
- Upper wing - 3D printing - wings with a hole (double) (reinforcement with rod: 2 mm for 1:32 scale, 1.2 mm for 1:48 scale, 0.8 mm for 1:72 scale)
- Main struts and landing gear with a hole for wires: (0.8 mm for 32 scale, 0.5 mm for 1:48 scale, 0.3 for 1:72 scale)
- 3 paint schemes for the Polish version of PWS-10 and 2 paint schemes for the Spanish version.
- Rods added to the set only for the 1:32 scale.
- Photoetched sheets
- Decal (digital printing, application on water - testing recommended)
- Auxiliary elements (wires, fairing template)
- Color instructions
PWS-10 1:32 Full Printed kit Spanish Service
The set includes:
- Model printed entirely in 3D technology, high quality, non-raster (may require slight smoothing).
- Upper wing - 3D printing - wings with a hole (double) (reinforcement with rod: 2 mm for 1:32 scale, 1.2 mm for 1:48 scale, 0.8 mm for 1:72 scale)
- Main struts and landing gear with a hole for wires: (0.8 mm for 32 scale, 0.5 mm for 1:48 scale, 0.3 for 1:72 scale)
- 3 paint schemes for the Polish version of PWS-10 and 2 paint schemes for the Spanish version.
- Rods added to the set only for the 1:32 scale.
- Photoetched sheets
- Decal (digital printing, application on water - testing recommended)
- Auxiliary elements (wires, fairing template)
- Color instructions
PWS-10 1:48 Full Printed kit
The set includes:
- Model printed entirely in 3D technology, high quality, non-raster (may require slight smoothing).
- Upper wing - 3D printing - wings with a hole (double) (reinforcement with rod: 2 mm for 1:32 scale, 1.2 mm for 1:48 scale, 0.8 mm for 1:72 scale)
- Main struts and landing gear with a hole for wires: (0.8 mm for 32 scale, 0.5 mm for 1:48 scale, 0.3 for 1:72 scale)
- 3 paint schemes for the Polish version of PWS-10 and 2 paint schemes for the Spanish version.
- Rods added to the set only for the 1:32 scale.
- Photoetched sheets
- Decal (digital printing, application on water - testing recommended)
- Auxiliary elements (wires, fairing template)
- Color instructions
PWS-10 1:48 Full Printed kit - Spanish Service
The set includes:
- Model printed entirely in 3D technology, high quality, non-raster (may require slight smoothing).
- Upper wing - 3D printing - wings with a hole (double) (reinforcement with rod: 2 mm for 1:32 scale, 1.2 mm for 1:48 scale, 0.8 mm for 1:72 scale)
- Main struts and landing gear with a hole for wires: (0.8 mm for 32 scale, 0.5 mm for 1:48 scale, 0.3 for 1:72 scale)
- 3 paint schemes for the Polish version of PWS-10 and 2 paint schemes for the Spanish version.
- Rods added to the set only for the 1:32 scale.
- Photoetched sheets
- Decal (digital printing, application on water - testing recommended)
- Auxiliary elements (wires, fairing template)
- Color instructions
PWS-10 1:72 Full Printed kit
The set includes:
- Model printed entirely in 3D technology, high quality, non-raster (may require slight smoothing).
- Upper wing - 3D printing - wings with a hole (double) (reinforcement with rod: 2 mm for 1:32 scale, 1.2 mm for 1:48 scale, 0.8 mm for 1:72 scale)
- Main struts and landing gear with a hole for wires: (0.8 mm for 32 scale, 0.5 mm for 1:48 scale, 0.3 for 1:72 scale)
- 3 paint schemes for the Polish version of PWS-10 and 2 paint schemes for the Spanish version.
- Rods added to the set only for the 1:32 scale.
- Photoetched sheets
- Decal (digital printing, application on water - testing recommended)
- Auxiliary elements (wires, fairing template)
- Color instructions
PWS-10 Full printed kit 1:72 Spanish service
The set includes:
- Model printed entirely in 3D technology, high quality, non-raster (may require slight smoothing).
- Upper wing - 3D printing - wings with a hole (double) (reinforcement with rod: 2 mm for 1:32 scale, 1.2 mm for 1:48 scale, 0.8 mm for 1:72 scale)
- Main struts and landing gear with a hole for wires: (0.8 mm for 32 scale, 0.5 mm for 1:48 scale, 0.3 for 1:72 scale)
- 3 paint schemes for the Polish version of PWS-10 and 2 paint schemes for the Spanish version.
- Rods added to the set only for the 1:32 scale.
- Photoetched sheets
- Decal (digital printing, application on water - testing recommended)
- Auxiliary elements (wires, fairing template)
- Color instructions