Language
What is your favourite scale?

Lukgraph

FOCKE WULF 56 STÖSSER

FOCKE WULF 56 STÖSSER
FOCKE WULF 56 STÖSSER

The Focke Wulf Fw 56 Stösser (German: goshawk) was a single-engine, high-wing monoplane advanced trainer, built in the 1930s in Germany. The first prototype flew for the first time in November 1933. About 1,000 aircraft were built, mostly used by Germany, though numbers were used by Austria, Hungary, Bulgaria, Spain, Romania, Netherland and other.

Availability: sold out

Price: €114.14

RWD 14b-Czapla 1:32

RWD 14b-Czapla 1:32
RWD 14b-Czapla 1:32
We will start shipments of models when the EP and decals reach us (approx. 4-8 weeks).
The photos show almost all the components - the model - some of them are still undergoing corrections (interior elements, compasses, fire extinguishers) - these are elements that will be 3D printed and will be included in the set.
The model will contain a lot of photo-etched plates (approx. 200? I stopped counting at 100). We have replaced the originally printed seat with a folding one made of EP and two cast quilted pillows. Same story with the folding observer seat.
3D prints: the entire engine will be printed, separate cylinders, engine block, exhaust manifold, carburetor and cover as well as the propeller. Additional printed elements are: guns (sheet metal optics) + 3 magazines, fire extinguishers, compasses and dashboard elements, 2 rudders (pilot and observer), pedals, position lights, several struts (the main loadbearing will be wire-reinforced), rear wheel… and the most important flare gun 

Availability: small amount

Dispatched within: 10 working days

Price: €125.79
szt.

Curtiss P-1A Hawk

Curtiss P-1A Hawk
Curtiss P-1A Hawk

The Curtiss F6C Hawk was a late 1920s American naval biplane fighter aircraft. It was part of the long line of Curtiss Hawk airplanes built by the Curtiss Aeroplane and Motor Company for the American military.

Originally designed for land-based use, the Model 34C was virtually identical to the P-1 Hawk in United States Army Air Corps service. The United States Navy ordered nine, but starting with the sixth example, they were strengthened for carrier-borne operations and redesignated Model 34D. Flown from the carriers Langley and Lexington from 1927–30, most of the later variants passed to Marine fighter-bomber units, while a few were flown for a time as twin-float seaplanes.

Availability: sold out

Price: €125.79

Curtiss F6C-1

Curtiss F6C-1
Curtiss F6C-1

The Curtiss F6C Hawk was a late 1920s American naval biplane fighter aircraft. It was part of the long line of Curtiss Hawk airplanes built by the Curtiss Aeroplane and Motor Company for the American military.

Originally designed for land-based use, the Model 34C was virtually identical to the P-1 Hawk in United States Army Air Corps service. The United States Navy ordered nine, but starting with the sixth example, they were strengthened for carrier-borne operations and redesignated Model 34D. Flown from the carriers Langley and Lexington from 1927–30, most of the later variants passed to Marine fighter-bomber units, while a few were flown for a time as twin-float seaplanes.

Availability: sold out

Price: €125.79

Hawker Nimrod Mk.1 1:32 scale

Hawker Nimrod Mk.1 1:32 scale
Hawker Nimrod Mk.1 1:32 scale
Note: Shipment of the model up to 20 days.
 
The set includes:
- Resin parts: fuselage, top, central and lower wings, horizontal and vertical tail wings.
All rest are 3D printed parts. Wings are reinforced by steel rod.
-3D printed parts (described below). Prints are secured in an additional box.
- Decals (screen printed) two of british painting schemes,
- Mask for Japanese export version, and british side belts.
- Color manual (16 pages)
- Photo-etched parts (over 50 elements)
- Copper rod (130 mm x 1,2 mm) as hook and stand element.
- Laser cutted cabine (mounted in PE frame) x 2
- Self-adhesive sticker cut as an instrument panel x 2
3D parts:
There are several innovations:
- grate-interior in one piece (it will save a lot of time searching for geometry and cleaning)
- main cooler also in 1 piece
- the exhaust pipe collector was originally supposed to be made of photo-etched sheets but in the end I made it 3D - it turned out very well.
- control panel integrated with the compass
When I was preparing 3D prints, I used the minimum number of supports to guarantee a printout, so you can cut all parts efficiently and without any problems.
Overall, there are almost 50 parts of direct components from 3D printing.
All the printed parts are described in detail in the model manual.

Availability: small amount

Dispatched within: 10 working days

Price: €130.45
szt.

Sopwith Baby British Service

Sopwith Baby British Service
Sopwith Baby British Service

The Baby was used as a shipborne reconnaissance and bomber aircraft operating from seaplane carriers and cruisers, as well as naval trawlers and minelayers. Many Babies were attached to RNAS coastal air stations located in England and Scotland and RNAS stations in Egypt, Greece and Italy.

A major role of the Baby was to intercept German Zeppelin raids as far from Britain as possible, along with tracking German naval movements.

Availability: sold out

Price: €130.45

Curtiss F6C-4

Curtiss F6C-4
Curtiss F6C-4

The Curtiss F6C Hawk was an interwar Navy and Marine Corps single engine, single seat fighter based on the Army’s Curtiss P-6 Hawk. Like the P-6 the early versions of the F6C were powered by a Curtiss V-12 liquid cooled engine. The aircraft was armed with two .30 caliber machine guns and could carry a small bomb load. Due to the aircraft’s sturdy design and construction, the F6C became one of the Navy’s first aircraft capable of dive bombing at a steep angle. A prototype of an updated version of the Hawk, designated F6C-4, was delivered to the Navy in 1927. The Navy had decided that air cooled radials were easier to maintain than liquid cooled inline engines while at sea, so the F6C-4 was designed and built with a Pratt & Whitney R-1340. The Navy ordered thirty-one F6C-4s and assigned them to Fighter Squadron 2 (VF-2B) aboard the USS Lexington. The Navy retired them from front line service in 1930, though the Marine Corps continued to use them until late 1932. Most of the Marine F6C-4s were assigned to Marine Fighter Squadron 10 (VF-10M) at Naval Air Station San Diego.

Availability: sold out

Price: €130.45

Vought SBU-1 Corsair

Vought SBU-1 Corsair
Vought SBU-1 Corsair

The Vought SBU-1 Corsair was a two-seat, all-metal biplane dive bomber built by Vought Aircraft Company of Dallas, Texas for the US Navy. Its design was based upon the F3U-1 two-seat fighter that was abandoned when the Navy decided not to build any more two-seat fighters. 

Availability: sold out

Price: €135.11

De Havilland DH.90 Dragonfly 1:32

De Havilland DH.90 Dragonfly 1:32
De Havilland DH.90 Dragonfly 1:32

De Havilland DH.90 Dragonfly 1:32 scale.

From today we accept preorders - shipping time to 60 days.

Availability: small amount

Dispatched within: 10 working days

Price: €139.07
szt.

DH 89 Dragon Rapide Scottish Airways

DH 89 Dragon Rapide Scottish Airways
DH 89 Dragon Rapide Scottish Airways

Shipping due Coronovirus pandemic.
There may be delays in the delivery of the model.




Availability: small amount

Dispatched within: 10 working days

Price: €139.07
szt.

DH 89 Dragon Rapide

DH 89 Dragon Rapide
DH 89 Dragon Rapide

Shipping due Coronovirus pandemic.
There may be delays in the delivery of the model.

 

 

 

 


Shipping due Coronovirus pandemic.
To the Australia - an economic package, New Zealand still blocked. You can already send priority to most European countries. If in doubt, you can ask for shipping. Remember that money can be returned until shipment.
There may be delays in the delivery of the model - there is always contact with us.
There will be plenty of models - we will do them where there is demand, it may be delayed in time, but they will be.

Availability: small amount

Dispatched within: 10 working days

Price: €139.07
szt.

CURTISS A-3 FALCON

CURTISS A-3 FALCON
CURTISS A-3 FALCON

The Curtiss Falcon was a family of military biplane aircraft built by the United States aircraft manufacturer Curtiss Aeroplane and Motor Company during the 1920s. The A-3 Attack Falcon saw considerable use, in frontline service with the 8th, 13th and 19th Attack Squadrons of the 3rd Attack Group, Barksdale Field, Louisiana, and the 26th Attack Squadron in Hawaii from 1928 to 1934 and with reserve units until 1937.

Availability: sold out

Price: €139.07

RAF BE2c 1:32 scale

RAF BE2c 1:32 scale
RAF BE2c 1:32 scale

Royal Aircraft Factory BE2c 1:32 LukGraph resin kit

 

Availability: small amount

Dispatched within: 10 working days

Price: €149.25
szt.
  • new

LLOYD C.V 1:32 scale in POLISH service

LLOYD C.V 1:32 scale in POLISH service
LLOYD C.V 1:32 scale in POLISH service

LLOYD C.V 1:32 LukGraph resin kit

LLOYD C.V 1:32

LLOYD C.V 1:32 PREMIUM SET 1:32 scale kit

LLOYD C.V 1:32 in Polish service

Availability: availability

Dispatched within: 10 working days

Price: €149.25
szt.

LLOYD C.V 1:32 scale

LLOYD C.V 1:32 scale
LLOYD C.V 1:32 scale

LLOYD C.V 1:32 LukGraph resin kit

LLOYD C.V 1:32

LLOYD C.V 1:32 PREMIUM SET 1:32 scale kit

LLOYD C.V 1:32 in Polish service

Availability: availability

Dispatched within: 10 working days

Price: €149.25
szt.

Albatros C.III 1-32 scale Polish service

Albatros C.III 1-32 scale Polish service
Albatros C.III 1-32 scale Polish service

Albatros C.III 1:32 LukGraph resin kit

From today we accept preorders - shipping time to 60 days.

Premium set: 3 x A4 sheets woodgrain and canvas decals, and masks (1mm rib strips, main German crosses) all made by LukGraph (few decals added to the online store as separately product).

Description of the kitset

Availability: availability

Dispatched within: 10 working days

Price: €149.25
szt.

Albatros C.III 1-32 scale

Albatros C.III 1-32 scale
Albatros C.III 1-32 scale

Albatros C.III 1:32 LukGraph resin kit

Premium set: 3 x A4 sheets woodgrain and canvas decals, and masks (1mm rib strips, main German crosses) all made by LukGraph (few decals added to the online store as separately product).

Description of the kitset

Availability: availability

Dispatched within: 10 working days

Price: €149.25
szt.

Friedrichshafen FF.33L 1:32 Polish Service

Friedrichshafen FF.33L 1:32  Polish Service
Friedrichshafen FF.33L 1:32 Polish Service

First batch shipping time from 6 to 10 weeks. Limited number of models.

German version FF.33L plane - 4 painting schemes.

Polish version - 1 painting scheme (different vertical stabilizer and other windscreen)

Kit-set description:

After building, the plane has a span of 415 mm and a length of 280 mm. It gives the impression of a large model also due to its height (about 120 mm). Weight about 500 g. The model is made entirely of resin. Bearing struts (float and wings) reinforced with steel wire, wings reinforced with 1.2 mm brass wire. Solid floats in one piece (not divided).

Availability: preorder

Dispatched within: 10 working days

Price: €149.25
szt.
up
Shop is in view mode
View full version of the site
Sklep internetowy od home.pl